MacOS Version X

[eugedunn]

Good Morning to all
I have a SCSI Zip Drive 100mg.
I would very much like to be able to use my Zip Drive.
Since i have installed my Version X, my Zip Drive does not work anymore.
But i am told that i would have to erase my Harddrive and install either MacOS 9.1 Full Install or 9.2 full Install and then re-install my Version X Software.
Is there another way to get around this, if not then i am looking for a copy of MacOS 9.1 or 9.2 full Install.
I am not a Computer Whiz, so please be specific.
                                                        Thank you for your time
                                                                eugedunn

[Michael Humphrey]

Hi! Have you gone on over to http://www.iomega.com to find the latest drivers for your Zip drive?

I pasted the URL from my browser, but it's kinda huge, (and probably won't work), so going to their download section and getting the latest drivers may help.

https://iomega-na-en.custhelp.com/cgi-bin/iomega_na_en.cfg/php/enduser/std_adp.php?p_faqid=16610&p_sid=MMIMBT8i&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0xMTgmcF9wcm9kX2x2bDE9MSZwX3Byb2RfbHZsMj0xOCZwX2NhdF9sdmwxPTczJnBfcGFnZT0x&p_li=

-Mike

[eugedunn]

I have been to the Iomega Website.
They do not support or have a driver for MacOS Version X.

[Repeater04]

You could buy this product to partition your drive without reformatting it. Go to products- ( DiskStudio )

http://keyword.netscape.com/ns/boomframe.jsp?query=techtool+pro&page=1&offset=0&result_url=redir%3Fsrc%3Dwebsearch%26requestId%3Dc23e3464e10f84e5%26clickedItemRank%3D1%26userQuery%3Dtechtool%2Bpro%26clickedItemURN%3Dhttp%253A%252F%252Fwww.micromat.com%252F%26invocationType%3D-%26fromPage%3DnsBrowserRoll%26amp%3BampTest%3D1&remove_url=http%3A%2F%2Fwww.micromat.com%2F

[PowerBookG417]

What version of OS X are you running / what version do you have on disc
you should have on their classic support, try installing classic support onto your machine and you should be okay

[eugedunn]

Good Morning
Where do i find this Classic Support.
I have been to the Apple Website, but found nothing there.
The Version that i am running is Tiger 10.46
                                     Thank you for your time

[PowerBookG417]

it will be found on your OS X install CD, Or you can just install a older version of OS 9 and it will boot it as classic

http://docs.info.apple.com/article.html?artnum=86775

follow the steps in this link

best of luck