I'm trying to install the above printer and have it connected, driver installed etc. Even that was quite a challenge of starts, and restarts. Now when I try to print, the printer whirs, the light blinks, and nothing happens. A test print works, the cable is 6' long, and plugged directly into the computer rather than via a hub. Paul suggested finding the generic printer driver rather than the Samsung one, but that is where I am stymied. Although Paul showed me the route, and I was able to repeat it on a computer here, I am not finding any other driver. Samsung Support has not yet solved it, although I will be calling them again.
Does anyone have this printer working and how did you do it?
Funny how support in some companies is good and in others, they don't seem to have much strength.
Okay, I think this topic should be in the support section, but here's what I found:
http://www.samsung.com/au/support/download/supportDown.do?group=printermultifunctionfax&type=printermultifunctionfax&subtype=monolaserprinter&model_nm=ML-2510&disp_nm=ML-2510&language=&cate_type=all&dType=D&mType=DR&vType=&prd_ia_cd=06010400&model_cd=&menu=download
This page shows drivers for OS X 10.3-10.6. Good luck and...
Happy Mac'ing!
Dan
Yes, thanks. This is what I've got and it isn't actually getting a page to print based on a command from the computer. It does make the printer respond, but it's incomplete.
You might try Printer Setup Repair, shareware from (http://www.fixamacsoftware.com). If you read my thread on trying to get a Samsung ML-1210 to work with OSX 10.3 (under Support), it finally fixed my problems (more or less).